2.0m High Standard Bow Top Railing Kit

2.0m High Standard Bow Top Railing Kit

The 2.0m High Standard Bow Top Railing Kit provides a strong, cost-effective solution for securing parks, gardens, schools and other public or private spaces. Made from durable galvanised steel, it offers long-lasting protection with minimal maintenance.

Each kit includes a 2.0m high Bow Top railing panel, a choice of dig-in or bolt-down post, and all required fixings. A Polyester Powder Coated (PPC) finish is also available in a range of RAL colours.

Features & Benefits

The curved bow top design offers an attractive, less intimidating alternative to traditional security fencing. With fewer sharp edges and exposed points, it is ideal for schools, parks and playgrounds.

Each panel features 20mm diameter tubes formed into bows, secured by two 10mm thick horizontal bars. The lower bar runs along the bottom, while the upper bar sits 150mm from the top.

Panels are supported by 70mm x 70mm hollow box section posts, with two support legs attached to the bottom rail for added stability.

Key benefits include:

• Strong, durable steel construction
• Suitable for public and private spaces
• Curved design with fewer sharp edges and points
• Galvanised finish for corrosion resistance
• Choice of dig-in or bolt-down posts
• Optional PPC finish in a range of RAL colours

Galvanised or Powder Coated Finish

The railing kits are supplied galvanised as standard. The zinc coating protects against rust and corrosion while providing a clean silver finish.

For added protection and a customised appearance, you can choose a Polyester Powder Coated (PPC) finish in a range of RAL colours. This also helps the railings complement existing site or corporate colours.

Any coating damage caused during installation or general use can be repaired with touch-up spray cans.

Post Options

Choose from two post types to suit your installation surface:

• Dig-in posts: Ideal for soft ground where holes can be excavated. Posts are installed into the ground and secured with post mix.
• Bolt-down posts: Suitable for hard surfaces such as concrete. These posts feature a pre-attached base plate and are secured using ground anchor bolts.

Each Kit Includes

• 1 x Bow Top Railing Panel
• 1 x Bow Top Railing Post
• 4 x Bow Top Railing Angle Cleats
• 6 x M10 x 30mm Bolts
• 2 x M10 x 90mm Bolts
• 8 x M10 Shear Nuts
• 2 x Support Legs

How to Step Your Panel

To accommodate changes in ground level, follow these steps:

1. Drill a 6mm pilot hole in the required position for the new cleat, allowing for the ground gradient.
2. Enlarge the hole to 12mm for the M10 bolt.
3. Touch up and spray the drilled area if required.
4. Secure the cleat using the appropriate M10 Square Cup Head Bolt and Shear Nut.
5. Attach the railing panel following the standard installation guidance.

Please note: Maintain the correct spacing to match the existing hole centres on the posts.

Complete Your Railing With a Matching Gate

Complete your perimeter with a matching Bow Top Railing Gate. Available in various sizes, these include single leaf pedestrian gates and double leaf gates up to 10m wide.

Like the railing kits, gates are available with dig-in or bolt-down posts and an optional PPC finish in a range of RAL colours.

Contact Us

Need help choosing the right railing system? Our friendly sales team can advise on product selection, technical requirements and installation. Call 01283 512 111, email sales@firstfence.co.uk, or speak to us through our online live chat.