BFT Pillar B 800 Hydraulic Automatic Bollard Single Kit – 10mm Skin
Product Description
BFT Pillar B 800 Hydraulic Automatic Bollard Single Kit - 10mm Skin
The BFT Pillar B 800 Hydraulic Automatic Bollard Single Kit – 10mm Skin is a high-strength, professional-grade vehicle access control system designed to deliver maximum protection, durability, and reliability in high-security and commercial environments.
Constructed with a 10mm-thick steel casing, this upgraded version of the Pillar B 800 offers superior resistance against impact and wear, making it a dependable solution for locations where heavy traffic or security demands are a concern. Measuring 275mm in diameter and 800mm in height above ground, it provides a strong physical and visual barrier to unauthorised vehicles, while maintaining an elegant, professional appearance suitable for modern architectural settings.
The LED crown light and rear reflective strip significantly enhance visibility, ensuring the bollard is clearly seen in low-light or night-time conditions. This not only improves safety but also adds a refined visual touch to the installation.
Designed for very intensive use, the BFT Pillar B 800 operates reliably for up to 3,000 cycles per day. Its hydraulic mechanism ensures smooth, powerful movement, raising and lowering the bollard in approximately 6.5 seconds. This performance makes it ideal for busy commercial sites, restricted vehicle zones, and sensitive locations such as government buildings, airports, and data centres.
The bollard is available in two operational formats:
Fail Safe – The bollard automatically lowers in the event of a power failure, allowing vehicles to pass. This configuration is ideal for public areas or emergency access routes.
Fail Secure – The bollard remains raised during a power outage, ensuring that access remains blocked. This setup is suited to high-security applications where maintaining protection is essential.
Each kit includes:
1 x Automatic Hydraulic Bollard (10mm skin)
1 x In-Ground Foundation Case
1 x Perseo Control Panel (to control up to 4 bollards)
2 x Mitto Cool Fobs
The Perseo control panel provides efficient operation and management, enabling the synchronised movement of up to four bollards. Additional bollards can be easily integrated by adding extra units to your setup.
Built for outdoor durability, the BFT Pillar B 800 is IP67 rated, offering complete protection against dust and water ingress. It features a painted finish in RAL 7015 (Slate Grey) as standard, with an optional stainless steel version available for environments requiring enhanced corrosion resistance or a polished appearance.
Installation must be carried out by a professional installer. It’s crucial to conduct a comprehensive risk assessment and ensure all electrical connections comply with safety regulations. A suitable soakaway system is essential to prevent flooding and preserve long-term performance.
In summary, the BFT Pillar B 800 Hydraulic Automatic Bollard Single Kit – 10mm Skin offers the perfect combination of strength, technology, and reliability. With intensive-use capability, a reinforced steel body, and intelligent control via the Perseo system, it delivers uncompromising protection and efficiency for high-security sites and commercial entrances.
Contact Us
Have questions about our Bollards? Then please get in touch with one of our helpful and friendly sales team. We can be reached by phone on 01283 512 111, by email at sales@firsfence.co.uk or through our online live chat service.
Specifications & Downloads
| Height | 800mm above ground |
| Diameter | 275mm |
| Shaft Thickness | 10mm |
| Finish | Painted finish RAL 7015 or Stainless Steel |
| Ratings | IP67 Rated |
| Time Raised / Lowered | 6.5 Seconds |
| Voltage | 230V |
| Frequency of Use | 3000 op/day |
What's Included
| Name | Quantity |
|---|---|
| Automatic Hydraulic Bollard | 1 |
| In Ground Foundation Case | 1 |
| Mitto Cool Fobs | 2 |
| Perseo Control Panel | 1 |
Specifications & Downloads
| Height | 800mm above ground |
| Diameter | 275mm |
| Shaft Thickness | 10mm |
| Finish | Painted finish RAL 7015 or Stainless Steel |
| Ratings | IP67 Rated |
| Time Raised / Lowered | 6.5 Seconds |
| Voltage | 230V |
| Frequency of Use | 3000 op/day |
What's Included
| Name | Quantity |
|---|---|
| Automatic Hydraulic Bollard | 1 |
| In Ground Foundation Case | 1 |
| Mitto Cool Fobs | 2 |
| Perseo Control Panel | 1 |
Product Description
BFT Pillar B 800 Hydraulic Automatic Bollard Single Kit - 10mm Skin
The BFT Pillar B 800 Hydraulic Automatic Bollard Single Kit – 10mm Skin is a high-strength, professional-grade vehicle access control system designed to deliver maximum protection, durability, and reliability in high-security and commercial environments.
Constructed with a 10mm-thick steel casing, this upgraded version of the Pillar B 800 offers superior resistance against impact and wear, making it a dependable solution for locations where heavy traffic or security demands are a concern. Measuring 275mm in diameter and 800mm in height above ground, it provides a strong physical and visual barrier to unauthorised vehicles, while maintaining an elegant, professional appearance suitable for modern architectural settings.
The LED crown light and rear reflective strip significantly enhance visibility, ensuring the bollard is clearly seen in low-light or night-time conditions. This not only improves safety but also adds a refined visual touch to the installation.
Designed for very intensive use, the BFT Pillar B 800 operates reliably for up to 3,000 cycles per day. Its hydraulic mechanism ensures smooth, powerful movement, raising and lowering the bollard in approximately 6.5 seconds. This performance makes it ideal for busy commercial sites, restricted vehicle zones, and sensitive locations such as government buildings, airports, and data centres.
The bollard is available in two operational formats:
Fail Safe – The bollard automatically lowers in the event of a power failure, allowing vehicles to pass. This configuration is ideal for public areas or emergency access routes.
Fail Secure – The bollard remains raised during a power outage, ensuring that access remains blocked. This setup is suited to high-security applications where maintaining protection is essential.
Each kit includes:
1 x Automatic Hydraulic Bollard (10mm skin)
1 x In-Ground Foundation Case
1 x Perseo Control Panel (to control up to 4 bollards)
2 x Mitto Cool Fobs
The Perseo control panel provides efficient operation and management, enabling the synchronised movement of up to four bollards. Additional bollards can be easily integrated by adding extra units to your setup.
Built for outdoor durability, the BFT Pillar B 800 is IP67 rated, offering complete protection against dust and water ingress. It features a painted finish in RAL 7015 (Slate Grey) as standard, with an optional stainless steel version available for environments requiring enhanced corrosion resistance or a polished appearance.
Installation must be carried out by a professional installer. It’s crucial to conduct a comprehensive risk assessment and ensure all electrical connections comply with safety regulations. A suitable soakaway system is essential to prevent flooding and preserve long-term performance.
In summary, the BFT Pillar B 800 Hydraulic Automatic Bollard Single Kit – 10mm Skin offers the perfect combination of strength, technology, and reliability. With intensive-use capability, a reinforced steel body, and intelligent control via the Perseo system, it delivers uncompromising protection and efficiency for high-security sites and commercial entrances.
Contact Us
Have questions about our Bollards? Then please get in touch with one of our helpful and friendly sales team. We can be reached by phone on 01283 512 111, by email at sales@firsfence.co.uk or through our online live chat service.