RB-IROC1Z75 Single Zone IRONCLAD Sensor Kit - 75m
Product Description
RB-IROC1Z75 Single Zone IRONCLAD Sensor Kit - 75m
When considering the security of your premises, there are many types of systems to choose from. While CCTV cameras are invaluable for post-incident investigation, perimeter intrusion detection systems (PIDS) such as IRONCLAD are essential because they provide the first line of defence.
Early Detection and Intervention (Proactive vs. Reactive)
PIDS provide early warning at the very first point of intrusion - the perimeter fence. They detect an intruder as they attempt to breach the fence, giving security personnel precious time to react before they even enter the property.
Cameras are reactive, they record events after they happen or as they are happening, and by the time the intruder is visible on the camera, they are often already inside the perimeter. This reduces response time significantly.
A clearly marked, sensor-protected fence acts as a strong deterrent. Intruders prefer easy targets, so knowing a fence is actively monitored and will trigger an alarm on contact may make them choose another, less protected site.
Introducing the Single Zone Sensor IRONCLAD Kit - 75m
The Single Zone IRONCLAD Sensor Kit is a ready-to-install, advanced fence intrusion detection system designed to transform any standard metal fence into a "smart" security barrier. By detecting vibrations caused by climbing, cutting, or lifting attempts, this perimeter security kit provides a critical layer of early detection before intruders gain access to your property. Ideal for small-to medium-sized facilities, it delivers the high performance and low false alarm rate of enterprise-level systems in a cost-effective, easily deployable package.
For larger areas First Fence also offers a Single Zone kit for up to 150m or 300m, a Dual Zone kit for up to 150m, 300m and 600mm.
Key Features and Benefits of IRONCLAD
Plug & Deploy Installation: Requires no special tools, complex calibration, or prior experience. The system is designed for simple, quick, and affordable installation by any technician onto metal fences.
75m (250ft) Armoured Sensor Cable: Protects a significant single zone of perimeter, reliably detecting intrusion attempts along the entire length and protecting fence heights up to 10 feet (3m) with a single cable run.
3 Layers of False Alarm Filtration: Uses advanced algorithms to filter out environmental noise (wind, rain, birds, small animals), ensuring only true intrusion attempts trigger an alert.
22 Sensitivity Levels: Easily adjust the zone sensitivity via on-board DIP switches to perfectly tune the system for specific fence types, terrain, and environmental conditions.
Dry Contact Relay Output: Connects universally to an existing alarm panel, DVR/NVR, CCTV system, or access control unit; the IRONCLAD acts as an extra, dedicated perimeter zone.
Maintenance-Free Design: The stainless steel braided sensor cable is built for harsh outdoor environments, minimising the need for ongoing maintenance and supported by a 2-year warranty (sensor cable only).
IP66/NEMA 4X Enclosure: The Local Processor Unit (LPU) is housed in a heavy-duty, weatherproof enclosure, ensuring reliable operation in temperatures from -40° to 80°C.
IRONCLAD operates reliably in all weather conditions, day or night. Rain, fog, snow or complete darkness do not impede its ability to detect vibrations on the fence.
Ideal Applications
This kit is the perfect solution for protecting smaller perimeters or dividing a larger property into manageable, highly sensitive zones.
Small Commercial/Industrial Sites: Protecting specific high-value areas, dumpsters, or equipment yards (e.g., HVAC units, storage containers).
Car, Boat, or RV Storage Areas: Securing the perimeter where high-value assets are stored outdoors.
Utility & Electrical Infrastructure: Protecting critical, unmanned assets like small electrical substations or water pumping stations.
Residential or Gated Communities: Providing a security layer for large, fenced residential properties or community facilities.
Temporary Sites: Can be deployed quickly for construction sites or pop-up facilities that require instant perimeter protection.
When integrated with an alarm system, it provides instant, location-specific alerts the moment an intrusion attempt is detected, so security personnel don't have to constantly monitor screens.
Note: This system is designed for use on any metallic fence, particularly flexible fences such as mesh or chain link but is not suggested for wooden fences. This product is a sensor and it can be connected to an existing alarm system.
Here to help
If you need any assistance with this product line, please get in touch. The sales team is waiting to help you with the advice needed to ensure you get the perfect product. The team can be reached by calling 01283 512111 or by using the online chat tool.
Specifications & Downloads
| Zone Capacity | Single Zone |
| Maximum Coverage | 75m [250ft] of perimeter fence |
| Power Requirements | 12 – 24V DC [Required for the LPU] |
| Intrusion Detection | Detects climbing, cutting, lifting, or prying of the fence structure |
| False Alarm Control | Uses a built-in 3-layer digital filter in the LPU to reduce false alarms from wind, rain, and environmental noise |
| Sensor Cable Armour | Stainless Steel Braid |
| Cable Outer Diameter | 6mm |
| Manufacturer SKU | RB-IROC1Z75 |
| Manufacturer Warranty | 2 Years (Sensor Cable Only) |
What's Included
| Name | Quantity |
|---|---|
| Roll of outdoor/indoor IRONCLAD sensor cable - 75m | 1 |
| End-of-line termination boards. Pre-installed at end of sensor cable | 2 |
| Local Processor (LPU-400 Analyser) Unit (Dual Zone) with relay output | 1 |
| IP66/NEMA4X rated weatherproof enclosure for LPU-400 processing unit | 1 |
Specifications & Downloads
| Zone Capacity | Single Zone |
| Maximum Coverage | 75m [250ft] of perimeter fence |
| Power Requirements | 12 – 24V DC [Required for the LPU] |
| Intrusion Detection | Detects climbing, cutting, lifting, or prying of the fence structure |
| False Alarm Control | Uses a built-in 3-layer digital filter in the LPU to reduce false alarms from wind, rain, and environmental noise |
| Sensor Cable Armour | Stainless Steel Braid |
| Cable Outer Diameter | 6mm |
| Manufacturer SKU | RB-IROC1Z75 |
| Manufacturer Warranty | 2 Years (Sensor Cable Only) |
What's Included
| Name | Quantity |
|---|---|
| Roll of outdoor/indoor IRONCLAD sensor cable - 75m | 1 |
| End-of-line termination boards. Pre-installed at end of sensor cable | 2 |
| Local Processor (LPU-400 Analyser) Unit (Dual Zone) with relay output | 1 |
| IP66/NEMA4X rated weatherproof enclosure for LPU-400 processing unit | 1 |
Product Description
RB-IROC1Z75 Single Zone IRONCLAD Sensor Kit - 75m
When considering the security of your premises, there are many types of systems to choose from. While CCTV cameras are invaluable for post-incident investigation, perimeter intrusion detection systems (PIDS) such as IRONCLAD are essential because they provide the first line of defence.
Early Detection and Intervention (Proactive vs. Reactive)
PIDS provide early warning at the very first point of intrusion - the perimeter fence. They detect an intruder as they attempt to breach the fence, giving security personnel precious time to react before they even enter the property.
Cameras are reactive, they record events after they happen or as they are happening, and by the time the intruder is visible on the camera, they are often already inside the perimeter. This reduces response time significantly.
A clearly marked, sensor-protected fence acts as a strong deterrent. Intruders prefer easy targets, so knowing a fence is actively monitored and will trigger an alarm on contact may make them choose another, less protected site.
Introducing the Single Zone Sensor IRONCLAD Kit - 75m
The Single Zone IRONCLAD Sensor Kit is a ready-to-install, advanced fence intrusion detection system designed to transform any standard metal fence into a "smart" security barrier. By detecting vibrations caused by climbing, cutting, or lifting attempts, this perimeter security kit provides a critical layer of early detection before intruders gain access to your property. Ideal for small-to medium-sized facilities, it delivers the high performance and low false alarm rate of enterprise-level systems in a cost-effective, easily deployable package.
For larger areas First Fence also offers a Single Zone kit for up to 150m or 300m, a Dual Zone kit for up to 150m, 300m and 600mm.
Key Features and Benefits of IRONCLAD
Plug & Deploy Installation: Requires no special tools, complex calibration, or prior experience. The system is designed for simple, quick, and affordable installation by any technician onto metal fences.
75m (250ft) Armoured Sensor Cable: Protects a significant single zone of perimeter, reliably detecting intrusion attempts along the entire length and protecting fence heights up to 10 feet (3m) with a single cable run.
3 Layers of False Alarm Filtration: Uses advanced algorithms to filter out environmental noise (wind, rain, birds, small animals), ensuring only true intrusion attempts trigger an alert.
22 Sensitivity Levels: Easily adjust the zone sensitivity via on-board DIP switches to perfectly tune the system for specific fence types, terrain, and environmental conditions.
Dry Contact Relay Output: Connects universally to an existing alarm panel, DVR/NVR, CCTV system, or access control unit; the IRONCLAD acts as an extra, dedicated perimeter zone.
Maintenance-Free Design: The stainless steel braided sensor cable is built for harsh outdoor environments, minimising the need for ongoing maintenance and supported by a 2-year warranty (sensor cable only).
IP66/NEMA 4X Enclosure: The Local Processor Unit (LPU) is housed in a heavy-duty, weatherproof enclosure, ensuring reliable operation in temperatures from -40° to 80°C.
IRONCLAD operates reliably in all weather conditions, day or night. Rain, fog, snow or complete darkness do not impede its ability to detect vibrations on the fence.
Ideal Applications
This kit is the perfect solution for protecting smaller perimeters or dividing a larger property into manageable, highly sensitive zones.
Small Commercial/Industrial Sites: Protecting specific high-value areas, dumpsters, or equipment yards (e.g., HVAC units, storage containers).
Car, Boat, or RV Storage Areas: Securing the perimeter where high-value assets are stored outdoors.
Utility & Electrical Infrastructure: Protecting critical, unmanned assets like small electrical substations or water pumping stations.
Residential or Gated Communities: Providing a security layer for large, fenced residential properties or community facilities.
Temporary Sites: Can be deployed quickly for construction sites or pop-up facilities that require instant perimeter protection.
When integrated with an alarm system, it provides instant, location-specific alerts the moment an intrusion attempt is detected, so security personnel don't have to constantly monitor screens.
Note: This system is designed for use on any metallic fence, particularly flexible fences such as mesh or chain link but is not suggested for wooden fences. This product is a sensor and it can be connected to an existing alarm system.
Here to help
If you need any assistance with this product line, please get in touch. The sales team is waiting to help you with the advice needed to ensure you get the perfect product. The team can be reached by calling 01283 512111 or by using the online chat tool.