Single zone MICALERT kit 75m
Product Description
Single zone MICALERT kit 75m
Protecting your premises involves choosing from a range of security systems. While CCTV is essential for post-incident review, perimeter intrusion detection systems (PIDS) such as MICALERT deliver the first line of defence.
Early Detection and Intervention (Proactive vs. Reactive)
PIDS deliver early warning at the first point of intrusion, the perimeter fence, detecting threats as a breach is attempted and giving security teams valuable time to respond before entry occurs.
CCTV systems are reactive, capturing events as or after they happen, often only once an intruder is already inside the perimeter, which significantly limits response time.
In addition, a clearly marked, sensor-protected fence acts as a powerful deterrent, discouraging intruders from targeting a site that is actively monitored.
Introducing the Single Zone MICALERT Kit - 75m
The Single Zone MICALERT Kit is a high-performance, microphonic sensor system designed to turn any rigid fence into a "smart" barrier. By pinpointing the specific frequencies caused by cutting, climbing, or lifting, this kit provides a critical layer of early detection.
While the IRONCLAD system is optimised for flexible mesh, the MICALERT is the professional's choice for a wider variety of perimeters, offering enterprise-grade vibration analysis in a simplified, 75m "Plug and Deploy" package. It is the ideal solution for sites requiring high-fidelity detection with minimal infrastructure.
For larger areas, we also offer MICALERT kits in 150m and 300m lengths, as well as Dual Zone processors for complex site layouts.
Key Features and Benefits of MICALERT
Plug & Deploy Installation: Designed for rapid deployment. The kit includes a pre-drilled weatherproof enclosure and internal processor, requiring no specialised tools or software for basic setup.
75m (250ft) High-Sensitivity Cable: The microphonic cable is UV-rated and designed to be zip-tied directly to the fence.4 A single run protects fence heights up to 3m (10ft).
Advanced Frequency Analysis: The system distinguishes between the high-frequency "sharp" vibrations of a break-in and the low-frequency "dull" vibrations of wind, rain, or small animals.
Precision Tuning: Features 22 levels of sensitivity adjustable via on-board DIP switches, or up to 500 levels via specialised software for sites with unique environmental challenges.
Universal Connectivity: Equipped with dry contact relay outputs (Normally Open/Normally Closed) to integrate seamlessly with any existing alarm panel, NVR, or automation system.
Extreme Durability: Built to withstand the harshest climates, the processor operates reliably in temperatures ranging from from -40° to 80°C.
Maintenance-Free: Once installed and calibrated, the MICALERT requires no regular maintenance, providing a "set and forget" security solution backed by a comprehensive manufacturer warranty.
Ideal Applications
This 75m kit is the perfect solution for protecting smaller perimeters or specific high-security sections of a larger property.
Commercial & Industrial Yards: Securing scrap metal yards, equipment storage, and warehouse perimeters.
Critical Infrastructure: Protecting unmanned sites such as solar farms, cellular towers, and electrical substations.
High-Value Storage: Ideal for car dealerships, boat yards, and RV storage facilities where perimeter breaches lead to high-cost theft.
Self-Storage Facilities: Providing individual zone monitoring for large-scale storage perimeters.
Government & Public Sector: Securing water treatment plants and municipal maintenance depots.
Note: This system is optimised for use on metallic fences, including Welded Mesh and Chain Link. It is not recommended for wooden or unstable fence structures. This product is a sensor kit intended for connection to an existing alarm or monitoring system.
Here to help
If you need any assistance with theproduct line, please get in touch. The sales team is waiting to help you with the advice needed to ensure you get the perfect product. The team can be reached by calling 01283 512111 or by using the online chat tool.
Specifications & Downloads
| Zone Length | 75 metres [approximately 250 ft] |
| Fence Height Coverage | Up to 3m [10ft] with a single run of cable |
| Power Requirements | 12–24V DC (40mA @ 12V DC) |
| Operating Temp | -40°C to +80°C [-40°F to 176°F] |
| Enclosure Rating | NEMA 4X / IP-66 (Weatherproof) |
| Manufacturer SKU | RB-MIC1Z75 |
| Manufacturer Warranty | 2 Years (Sensor Cable Only) |
What's Included
| Name | Quantity |
|---|---|
| Roll of outdoor/indoor MICALERT sensor cable - 75m | 1 |
| End-of-line termination boards. Pre-installed at end of sensor cable | 2 |
| Local Processor (LPU-400 Analyser) Unit (Dual Zone) with relay output | 1 |
| IP66/NEMA4X rated weatherproof enclosure for LPU-400 processing unit | 1 |
Specifications & Downloads
| Zone Length | 75 metres [approximately 250 ft] |
| Fence Height Coverage | Up to 3m [10ft] with a single run of cable |
| Power Requirements | 12–24V DC (40mA @ 12V DC) |
| Operating Temp | -40°C to +80°C [-40°F to 176°F] |
| Enclosure Rating | NEMA 4X / IP-66 (Weatherproof) |
| Manufacturer SKU | RB-MIC1Z75 |
| Manufacturer Warranty | 2 Years (Sensor Cable Only) |
What's Included
| Name | Quantity |
|---|---|
| Roll of outdoor/indoor MICALERT sensor cable - 75m | 1 |
| End-of-line termination boards. Pre-installed at end of sensor cable | 2 |
| Local Processor (LPU-400 Analyser) Unit (Dual Zone) with relay output | 1 |
| IP66/NEMA4X rated weatherproof enclosure for LPU-400 processing unit | 1 |
Product Description
Single zone MICALERT kit 75m
Protecting your premises involves choosing from a range of security systems. While CCTV is essential for post-incident review, perimeter intrusion detection systems (PIDS) such as MICALERT deliver the first line of defence.
Early Detection and Intervention (Proactive vs. Reactive)
PIDS deliver early warning at the first point of intrusion, the perimeter fence, detecting threats as a breach is attempted and giving security teams valuable time to respond before entry occurs.
CCTV systems are reactive, capturing events as or after they happen, often only once an intruder is already inside the perimeter, which significantly limits response time.
In addition, a clearly marked, sensor-protected fence acts as a powerful deterrent, discouraging intruders from targeting a site that is actively monitored.
Introducing the Single Zone MICALERT Kit - 75m
The Single Zone MICALERT Kit is a high-performance, microphonic sensor system designed to turn any rigid fence into a "smart" barrier. By pinpointing the specific frequencies caused by cutting, climbing, or lifting, this kit provides a critical layer of early detection.
While the IRONCLAD system is optimised for flexible mesh, the MICALERT is the professional's choice for a wider variety of perimeters, offering enterprise-grade vibration analysis in a simplified, 75m "Plug and Deploy" package. It is the ideal solution for sites requiring high-fidelity detection with minimal infrastructure.
For larger areas, we also offer MICALERT kits in 150m and 300m lengths, as well as Dual Zone processors for complex site layouts.
Key Features and Benefits of MICALERT
Plug & Deploy Installation: Designed for rapid deployment. The kit includes a pre-drilled weatherproof enclosure and internal processor, requiring no specialised tools or software for basic setup.
75m (250ft) High-Sensitivity Cable: The microphonic cable is UV-rated and designed to be zip-tied directly to the fence.4 A single run protects fence heights up to 3m (10ft).
Advanced Frequency Analysis: The system distinguishes between the high-frequency "sharp" vibrations of a break-in and the low-frequency "dull" vibrations of wind, rain, or small animals.
Precision Tuning: Features 22 levels of sensitivity adjustable via on-board DIP switches, or up to 500 levels via specialised software for sites with unique environmental challenges.
Universal Connectivity: Equipped with dry contact relay outputs (Normally Open/Normally Closed) to integrate seamlessly with any existing alarm panel, NVR, or automation system.
Extreme Durability: Built to withstand the harshest climates, the processor operates reliably in temperatures ranging from from -40° to 80°C.
Maintenance-Free: Once installed and calibrated, the MICALERT requires no regular maintenance, providing a "set and forget" security solution backed by a comprehensive manufacturer warranty.
Ideal Applications
This 75m kit is the perfect solution for protecting smaller perimeters or specific high-security sections of a larger property.
Commercial & Industrial Yards: Securing scrap metal yards, equipment storage, and warehouse perimeters.
Critical Infrastructure: Protecting unmanned sites such as solar farms, cellular towers, and electrical substations.
High-Value Storage: Ideal for car dealerships, boat yards, and RV storage facilities where perimeter breaches lead to high-cost theft.
Self-Storage Facilities: Providing individual zone monitoring for large-scale storage perimeters.
Government & Public Sector: Securing water treatment plants and municipal maintenance depots.
Note: This system is optimised for use on metallic fences, including Welded Mesh and Chain Link. It is not recommended for wooden or unstable fence structures. This product is a sensor kit intended for connection to an existing alarm or monitoring system.
Here to help
If you need any assistance with theproduct line, please get in touch. The sales team is waiting to help you with the advice needed to ensure you get the perfect product. The team can be reached by calling 01283 512111 or by using the online chat tool.